I have a SunBlade?
100. It had a Sun Elite 3D Lite video card in addition to the built-in ATI video. I had to remote the Sun Elite 3D Lite to do the install of 1.0. Haven't tried putting that video card back in yet.
Also, had to use ide=nodma on install. Did not set up network automatically but just ran netconfig and it configured fine. Have not tested sound.
--Later, I'm not sure if I needed the ide=nodma or not. At least when dealing with hda. I have an hda and hdc and I think the dma may be broken on hdc (IDE1). When booting to "2.4.20-2.3sparc ide=nodma" I kept getting "<hda>: lost interrupt" and my machine would hang. It could do it quickly or after a while. I ended up booting without the "ide=nodma" and had no problems running.
I could not boot the 2.4.20-2.31sparc kernel -- it would panic and complain about root being missing after several irrelevant messages about LVM. Even when I compiled the kernel myself from the SRPM file it would do the same thing. So I did the Aurora 1.0 to Aurora 1.92 upgrade using the original 1.0 kernel, 2.4.20-2.3sparc. And I did it WITHOUT the "ide=nodma" and it worked fine.
So now I'm running 1.92. I tried booting from the console and it panic'd right away, with the second panic that I could read (didn't get scrolled off) mentioning swapper(0). Unable to read and therefore copy/paste the test to anyone I scrounged around and found a serial cable and hooked it between the SB100 and my RHEL3 laptop. When I booted without keyboard and mouse on the SB100 (to force serial console) it booted fine. How strange is that?
I haven't tried booting again yet as this happened at the end of work yesterday. I hope to try again today.
[[email protected] root]# cat /proc/cpuinfo
cpu : TI UltraSparc IIe (Hummingbird)
fpu : UltraSparc IIe integrated FPU
promlib : Version 3 Revision 5
prom : 4.5.9
type : sun4u
ncpus probed : 1
ncpus active : 1
Cpu0Bogo : 997.37
Cpu0ClkTck : 000000001debe980
MMU Type : Spitfire
[[email protected] root]#
OpenSSL 0.9.7a Feb 19 2003
built on: Sat Aug 7 03:29:50 CDT 2004
options:bn(64,32) md2(int) rc4(ptr,char) des(idx,cisc,16,long) aes(partial) blowfish(ptr)
compiler: gcc -DOPENSSL_SYSNAME_ULTRASPARC -fPIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DKRB5_MIT -DOPENSSL_NO_ASM -DOPENSSL_NO_IDEA -DOPENSSL_NO_MDC2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_EC -I/usr/kerberos/include -DB_ENDIAN -DTERMIO -Wall -DBN_DIV2W -O2 -g -pipe -m32 -mcpu=ultrasparc -Wa,--noexecstack
available timing options: TIMES TIMEB HZ=100 [sysconf value]
timing function used: times
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
md2 319.98k 703.36k 1006.19k 1121.62k 1162.12k
mdc2 0.00 0.00 0.00 0.00 0.00
md4 2263.11k 7545.64k 22927.62k 46476.24k 66535.42k
md5 1957.13k 6262.81k 17925.46k 33439.74k 44843.01k
hmac(md5) 1147.56k 3945.76k 12662.78k 28009.81k 43450.37k
sha1 1659.31k 5585.24k 15117.23k 26363.90k 33772.89k
rmd160 1368.27k 2501.25k 7258.11k 13830.14k 18817.02k
rc4 42834.07k 50112.87k 52467.29k 53083.14k 53376.77k
des cbc 6398.85k 6798.89k 6907.22k 6933.16k 6853.97k
des ede3 2292.50k 2369.71k 2391.21k 2395.48k 2386.60k
idea cbc 0.00 0.00 0.00 0.00 0.00
rc2 cbc 6087.80k 6289.66k 6339.58k 6361.09k 6378.25k
rc5-32/12 cbc 0.00 0.00 0.00 0.00 0.00
blowfish cbc 14966.27k 16249.83k 16601.60k 16743.94k 15927.95k
cast cbc 10829.08k 11488.28k 11697.32k 11727.53k 11704.42k
aes-128 cbc 11065.86k 11427.31k 11478.70k 11499.86k 11386.88k
aes-192 cbc 9758.52k 10009.49k 10102.78k 10081.96k 10051.58k
aes-256 cbc 8728.93k 8935.49k 9010.35k 9004.37k 8904.70k
sign verify sign/s verify/s
rsa 512 bits 0.0068s 0.0007s 148.0 1492.5
rsa 1024 bits 0.0384s 0.0022s 26.0 465.1
rsa 2048 bits 0.2495s 0.0075s 4.0 133.1
rsa 4096 bits 1.7333s 0.0274s 0.6 36.4
sign verify sign/s verify/s
dsa 512 bits 0.0061s 0.0075s 163.6 133.2
dsa 1024 bits 0.0203s 0.0255s 49.2 39.2
dsa 2048 bits 0.0718s 0.0885s 13.9 11.3
[[email protected] proc]#